Design contains obsolete parts

DCMOTORCONTRBTN8982TOBO1: 30A, 8 ~ 18V DC Brush Motor Shield

Summary

The DCMOTORCONTRBTN8982TOBO1 Motor Control Shield adds powerful motor control to the Arduino projects. The shield can be controlled with the general logic IO-Ports of a microcontroller. Either an Arduino Uno R3 or the XMC1100 Boot Kit from Infineon can be used as the master.

On board of the Motor Control Shield are two BTN8982TA, NovalithIC. Each is featuring one P-channel high side MOSFET and one N-channel low side MOSFET with an integrated driver IC in one package. Due to the P-channel high side switch a charge pump is not needed.

The BTN8982TA half-bridge is easy to control by applying logic level signals to the IN and INH pin. When applying a PWM to the IN pin the current provided to the motor can be controlled with the duty cycle of the PWM. With an external resistor connected between the SR pin and GND the slew rate of the power switches can be adjusted.

The Motor Control Shield can be easily connected to any Arduino board or the XMC1100 Boot Kit via headers.

Specifications

Manufacturer	Infineon Technologies
Category	Motor Control
Eval Board Part Number	DCMOTORCONTRBTN8982TOBO1-ND
Eval Board Supplier	Infineon Technologies
Eval Board	Normally In Stock
Voltage In	8 ~ 18 V
Number of Motors and Type	1, DC Brush Motor
Power / Current Out	30 A
Features	Arduino Compatible Current Limit (Adj. or Fixed) Over Current Protection PWM Interface Reverse Polarity Protection Short Circuit Protection Thermal Protection Under Voltage Protection, Brown-Out
Component Count + Extras	25 + 5
Application / Target Market	Automotive Medical Motor Control
Design Author	Infineon Technologies
Main I.C. Base Part	BTN8982TA IPD90P04P4L
Date Created By Author	2016-06
Date Added To Library	2018-06