ADP1071-2EBZ12.1V: 12.1 @ 3A, 36 ~ 60 Vin

Summary

The ADP1071-2EBZ12.1V evaluation board allows users to evaluate the ADP1071-2 in a power supply application. The evaluation board is set up to act as an isolated power supply unit (PSU), with a rated load of 12.1 Vdc, 3 A in steady state (5 A peak) from a 36 Vdc to 60 Vdc source.

Connectors on the ADP1071-2EBZ12.1V provide synchronization, allowing direct paralleling evaluation when multiple ADP1071-2EBZ12.1V evaluation boards are connected in parallel to a common bus.

Multiple test points allow easy access to all critical nodes and pins. Complete information about the ADP1071-2 is available in the ADP1071-1/ADP1071-2 data sheet, which should be consulted in conjunction with this user guide when using the evaluation board.

Specifications

Manufacturer	Analog Devices Inc.
Category	AC/DC and DC/DC Conversion
Sub-Category	DC/DC SMPS - Single Output
Eval Board Part Number	505-ADP1071-2EBZ12.1V-ND
Eval Board Supplier	Analog Devices Inc.
Eval Board	Normally In Stock
Topology	Step Down
Outputs and Type	1 Isolated
Voltage Out: Factory Set	12 V 12.1 V
Current Out	3 A
Voltage In	36 ~ 60 V
Efficiency @ Conditions	>90%, 60V in, 12.1V @ 3.25 ~ 5 A >90%, 48V in, 12.1V @ 2.6 ~ 5 A >90%, 36V in, 12.1V @ 2 ~ 5 A
Voltage Out Range	- Fixed
Features	Current Limit (Adj. or Fixed) Light Load Mode Over Current Protection Over Discharge Protection Short Circuit Protection Soft Start Synchronizable Thermal Protection
Switching Frequency	300 kHz
Standby Current [Typical]	- Not Given
Quiescent Current [Typical]	11 mA
Component Count + Extras	80 + 33
Internal Switch	No
Design Author	Analog Devices
Application / Target Market	Distributed Power Systems Networking PoE, Power Over Ethernet Power: Industrial Power Servers
Standby Current [Maximum]	55 µA
Quiescent Current [Maximum]	- Not Given
Main I.C. Base Part	ADP1071-2
Date Created By Author	2018-10
Date Added To Library	2019-12