The ADP1071-1EVALZ evaluation board is set up to act as an isolated power supply solution that incorporates three output voltages (+5.5 V, +24 V, and −15 V) at a total rated power of 15 W. The evaluation board also provides 5 kV isolation in compact form factor, making it suitable for industrial applications, which usually have a variety of voltage rails.

BD7F100EFJ-EVK-002 Evaluation board delivers outputs 15 volts and -15 volts from an input 24 volts using BD7F100EFJ-LB, Isolated Flyback DC/DC converter integrated circuit, with output current rating of 165mA maximum.

The BD7F200EFJ-EVK-001 Evaluation board delivers four outputs each 15 volts from an input of 24 volts using the BD7F200EFJ-LB, Isolated Flyback DC/DC converter integrated circuit, with a maximum output current rating of 150mA.

The TC1303B Dual-Output Regulator with Power-Good Output Demo Board can be used to evaluate the TC1303B device over the input voltage range and output current range for both the synchronous buck regulator output and the low-dropout linear regulator output.

Features:

• 500 mA synchronous inductor-based dc-dc BUCK converter + 300 mA LDO with Powe…

The ACT8945AEV contains a fully assembled and tested circuit board designed to demonstrate all the features of the ACT8945A. The ACT8945AEV includes a variety of test points and jumpers as necessary to configure and evaluate the ACT8945A’s functionality.

This user guide describes the hardware for the evaluation of the ADP5023/ADP5024/ADP5034/ADP5037 and includes detailed schematics and PCB layouts. The ADP5023/ADP5024/ ADP5034/ADP5037 are available in a 24-lead 4 mm × 4 mm LFCSP package. The ADP5023/ADP5024 are three-channel devices that share a common PCB evaluation board. The ADP5034/ADP5037 are four-channel devices and share a common evaluatio…

The TPS65011 also has a highly integrated and flexible Li-Ion linear charger and system power management. It offers integrated USB-port and ac-adapter supply management with autonomous power-source selection, power FET and current sensor, high accuracy current and voltage regulation, charge status, and charge termination.

DC2738A is a triple output synchronous step-up/dual step-down supply featuring the LTC7815. The demonstration circuit is designed for two buck circuits VOUT1 5V @ 8A and VOUT2 3.3V @ 8A outputs supplied by a boost circuit VOUT3 10V @ 7A output. (If VIN is higher than 10V then VOUT3 equals to VIN.)