EVAL6599-200W: 200W, 24V, 12V, 5V, and 3.3V w/PFC

Summary

This note describes the performances of a 200 W reference board, with wide-range mains operation and power-factor-correction (PFC). Its electrical specification is tailored to a typical high-end application for LCD TV or monitor applications.

The main features of this design are the very low no-load input consumption (<0.5 W) and the very high global efficiency, better than 87% at full load and nominal mains voltage (115 - 230 Vac).

The circuit consists of three main blocks; the first is a front-end PFC pre-regulator based on the L6563 PFC controller. The second stage is a multi-resonant half-bridge converter whose control is implemented through the STMicroelectronics L6599 resonant controller. A further auxiliary flyback converter based on the VIPer12A-E off-line primary switcher completes the architecture. This third block is mainly intended for microprocessor supply and display power management operations.

Specifications

Manufacturer	STMicroelectronics
Category	AC/DC and DC/DC Conversion
Sub-Category	AC/DC SMPS - Multi Output
Eval Board Part Number	497-5496-ND
Eval Board Supplier	STMicroelectronics
Eval Board	Board not Stocked
AC Voltage	115 V 230 V Universal (115 / 230V)
Outputs and Type	4 Isolated
Voltage Out: Highest Current First	24V, 12V, 5V, 3.3V
Current Out	6A, 5A, 1A, 700mA
Output Power	200 W
Efficiency @ Conditions	>88%, 230 V in @ 25 ~ 100% Load >88%, 115V in @ 25 ~ 100% Load
No-load Input Power @ Voltage	221 mW @ 115 V 470 mW @ 230 V
Features	Over Current Protection Over Voltage Protection PFC Short Circuit Protection Thermal Protection
Switching Frequency	95 kHz
Internal Switch	No
Component Count + Extras	176 + 3
Voltage In	90 ~ 264 VAC
Application / Target Market	Computers LCD TV / Monitor Telecom
Design Author	STMicroelectronics
Main I.C. Base Part	L6599
Date Created By Author
Date Added To Library	2011-03