Designs (816)

816 Results - Page 1/82 |< < 1 2 3 4 5 > >|

MCP1612EV#1: 0.8V, 1.7V, 2.4V, or 3.3V @ 1A; Vout+0.5 ~ 5.5V in

Manufacturer: Microchip Technology

This Synchronous Buck Evaluation Board features Microchip's 1A 1.4MHz synchronous buck regulator in two buck converter applications.

View Design

XRP7714EVB-DEMO-2P-KIT: 4 Chan, 4A, 4.5 ~ 25V in

Manufacturer: MaxLinear, Inc.

The XRP7714EVB-DEMO-1, XRP7714EVB-DEMO-2, and the XRP7714EVB-DEMO-2P demo boards are complete, working, four channel, power systems measuring either 2”x2”, or 2”x2.5” capable of delivering over 35 watts. They provide 3.3V, 2.5V, 1.8V, and 1V at a maximum of 4 amps per channel. The 2.5V, 1.8V, and 1V supplies can be adjusted in 50mV increments, and the 3.3V supply is adjustable in 100mV increments.…

View Design

TPS62020EVM-019: 1.5V @ 600mA, 2.5 ~ 6V in, Buck

Manufacturer: Texas Instruments

The Texas Instruments TPS62020 evaluation module (EVM) for low-power, high-efficiency, step-down converters helps designers evaluate this device. The EVM enables evaluation of different device modes and device performance.

View Design

TPS64202EVM-023: 3.3V @ 2A, 3.3 ~ 6V Out

Manufacturer: Texas Instruments

The TPS64202EVM-023 is an evaluation tool for the TPS64202 inductive step-down controller in SOT-23 package which can supply voltages down to 1.2V from a 1.8-V to 6.5-V input.

View Design

TPS40200EVM-001: 3.3V @ 2.5A, 8 ~ 16 Vin

Manufacturer: Texas Instruments

The TPS40200EVM-001 evaluation module (EVM) uses the TPS40200 nonsynchronous buck converter to provide a resistor-selected 3.3-V output voltage that delivers up to 2.5 A from a 12-V input bus. The EVM operates from a single supply and uses a single P-channel power FET and Schottky diode to produce a low-cost buck converter. The part operates at a 300-kHz clock frequency with provision for externa…

View Design

TPS62050EVM-234: 3.3V @ 800mA, 2.7 ~ 10V in, Buck

Manufacturer: Texas Instruments

The Texas Instruments TPS62050 and TPS62052 evaluation modules (EVM) for low-power, high-efficiency, step-down converters help designers evaluate these devices. The EVMs make it possible to evaluate different modes of the devices as well as the device performance.

View Design

UCC28600EVM: 120W, 19.4V @ 6.2A with PFC, 85~265VAC

Manufacturer: Texas Instruments

The UCC28600 evaluation module (EVM) is a 120-W off-line quasi-resonant flyback converter providing a 19.4-V regulated output at 6.2 A of load current, operating from a universal ac input.

View Design

STEVAL-ISA018V1: 150W, 24V @ 6A, 85~185/185~265VAC

Manufacturer: STMicroelectronics

This user manual describes a high efficiency solution for industrial power supplies with a continuous output power of 150 W and peak power up to 240 W. It takes advantage of the resonant approach to minimize switching losses, resulting in higher than 90% efficiency. The topology is based on half-bridge and operated in a resonant fashion by means of a resonant LC tank, driven by the L6599 dedicate…

View Design

LM5008EVAL: 10V @ 300mA, 12 ~ 95V in

Manufacturer: Texas Instruments

The LM5008 Step down switching regulator features all of the functions needed to implement low cost, efficient, Buck bias regulators. This high voltage regulator contains a 100V, 0.5A N-channel Buck switch.

View Design

AN954: Off-Line Capacitive Power Supply

Manufacturer: Microchip Technology

* From page 10 of AN954: Figure 10 shows a capacitive power supply with several UL considerations designed in. A fuse is added to protect the circuit during an over-current condition. Adding R2 in parallel with C1 creates a filter that will attenuate EMI from traveling back onto the line. A varistor, or MOV, provides transient protection.

View Design
816 Results - Page 1/82 |< < 1 2 3 4 5 > >|