Articles & Blogs

Many semiconductor production environments rely on standalone software security systems resulting in a malware risk via USB flash drives or maintenance PCs.

A discussion of precision pressure monitors and how they cater to the needs of pneumatic and compressed air systems in industrial and robotics applications.

Inrush currents can cause significant issues in an industrial plant. As a result, an effective inrush current management strategy is crucial.

Learn how Semtech SurgeSwitch transient diverting suppressors protect USB-PD and PoE circuits from EOS and ESD during industrial power surge events.

Learn the basics and the different types of resistance temperature detectors (RTDs) and applications best suited for them.

Advanced IR emitters offer high performance and consistent operation, with a broad range of devices to best meet application priorities.

Early results for AI adoption across large procurement organizations show promise.

Explore how Qorvo’s cutting-edge RF components—Low Noise Amplifiers (LNAs), switches, mixers, and filters—can transform your design process.

Explore a modular approach to 22 mm pilot devices that addresses industrial challenges with the Eaton M22 series field-configurable functionality pushbuttons.

Use the PSOC Control C3 MCUs’ combination of fast analog, CORDIC math, and high-resolution PWM for efficient and precise motor control.

Explore a modular approach to 22 mm pilot devices that addresses industrial challenges with the Eaton M22 series field-configurable functionality pushbuttons.

Agtech solutions needed to support precision agriculture and sustainable farming practices require many parts and components that monitor and collect data.

The 2-Pin JST-PH 2.0 connector is found on many LiPo batteries used in hobby drones, RC cars and toys, and of course, electrical boards and modules. These are handy little connectors, but there is one problem - the polarity convention.

Thermal imaging reveals how microcontrollers behave in deep sleep vs active mode. See why the ESP32 microWatt outperforms for battery-powered applications.

Speakers depend not only on their internal components but also on the acoustic environment in which they operate, such as rear enclosures.

When designing consumer electronics, industrial systems, or embedded devices, managing heat is critical. Forced air cooling can be critical in product success.

Why high-voltage and resistance circuits need low-VCR (voltage coefficient of resistance) resistors.

Learn how SIRIUS ACT 3SU1 modular control pushbuttons offer snap-together assembly, IP69K and NEMA 4 protection, and flexible automation networking.

GaN high-voltage switches, control ICs, and feedback circuits drive high-efficiency power converters.

ITT Cannon’s DL series connectors provide reliable, high-density zero insertion force (ZIF) connections for demanding applications.

As commercial vehicles become increasingly connected and automated, the ability to record, store, and analyze driving data is more important than ever.

To handle multiple satellite constellation frequency bands, a GNSS receiver employs a multiband antenna to realize higher accuracy and reliability.

A 16-bit ADC will not always give 16-bits of useful information. A lot of 16-bit ADCs really operate as 7-bit ADCs and 9-bit random number generators.

Abracon’s AMMLP Series low-power MEMS oscillators provide timing solutions for efficient and reliable performance in diverse applications.

Learn how precise monitoring, active cell balancing, and robust diagnostic maximize usable capacity, extends battery life, and minimizes maintenance.

Learn how Digi’s XBee 3 BLU Bluetooth modules support large-scale IoT networks to improve efficiency in industrial automation applications.

Arduino has released the next-gen UNO Q, a single board computer that combines a Linux Debian-capable microprocessor with a real-time STM32U585 microcontroller.

Electronics teardown of LED therapy masks: how they manage power, control LEDs, and survive daily wear.

Battery replacement is time-consuming, inefficient, and counterproductive to the IoT vision of autonomous, always-on devices. Solar cells can be the solution.

GMSL point-to-point link technology brings enhanced multi-camera video capabilities to industrial and automotive applications.

Legacy PoE standards met the power requirements of early IP cameras that drew 8-30 W. However, advanced PTZ cameras with AI capabilities require 50 W or more.

Automotive grade ultrasonic sensors with integrated closed-type transceivers and sound-absorbing materials, ensure stability even in extreme environments.

Learn how to reduce panel size and not power, manage inrush current and peak loads, and best practices for selecting power supplies for global automation.

Software-defined radios represent a significant transformation in the field of wireless communication. It shifts much of the processing to the digital domain.

Discover how a family of scalable DIN rail power supplies solves for flexibility, compactness, built-in intelligence, and global compatibility.

Practical insights and real-world strategies to help you design smarter and faster with TRACO’s ultra-wide input converters which are flexible and robust.

Hardwired systems can create hidden inefficiencies that compound over equipment lifecycles. Modular connector solutions can solve this problem.

Visit DigiKey at Maker Faire Rome 2025 for hands-on demos of Arduino, Adafruit, Raspberry Pi, & other cutting-edge new technologies, plus exclusive giveaways.

Solid-state relay (SSR) problems can stem from the improper design parameters: thermal management, switching type, current rating, and overvoltage protection.

Learn how cutting-edge SiC packaging innovations and protection solutions can overcome power design hurdles and elevate your system design.

Advanced EC motors and axial fans from ebm-papst drive energy-efficient innovations in ventilation and cooling solutions.

Multi-turn rotary encoders are sensors that measure the angular position of a shaft within a single revolution and the cumulative number of complete rotations.

Find out how to configure three Kelvin-structure 4-pin resistors in parallel to make accurate electronic measurements.

Use WAGO 221 Series lever wire connectors for safe and simple residential and industrial splicing of solid and stranded conductors, even with mixed gauges.

Smart Bluetooth beacons with System-on-a-Chip technology collect and analyze operational data in real time to provide machine-learning-informed insights.

Combine advanced IMUs and other sensor types with sensor fusion for precise autonomous mobile robot (AMR) navigation in challenging environments.

A drop-in solution with edge AI enables immediate deployment of wireless condition-based monitoring with real-time notification of vibration anomalies.

Explore power density, thermal performance, and reliability and dive deep into the design of string inverters and battery storage for solar power applications.

A dive into the critical role of interconnect systems in aerospace and defense applications and how to design for performance, durability, and adaptability.

The Raspberry Pi 500+ features a mechanical RGB keyboard, upgrades memory to 16GB, and includes a pre-loaded 256GB SSD with the latest Raspberry Pi OS.

3PEAK single-channel DACs, featuring high precision and compact MSOP packages, ensure analog conversion for demanding applications.

Explore how to simplify and accelerate the adoption of machine vision at the intelligent edge by balancing performance, flexibility, and affordability.

The accelerating trend towards point-of-care medical tests and assessments requires sophisticated, application-focused analog front-end and data security ICs.

Whether you're designing new panels or retrofitting existing ones, this webinar will help you optimize your layout, boost productivity, and ensure compliance.

LT8618 buck regulators from ADI overcome the limitations of LDOs for efficient power and thermal management in compact designs.

With the rapid expansion of connected automotive and telematics systems, cybersecurity has become non-negotiable - telematics devices must be secure by design.

Effective business strategies are necessary to mitigate the effects of fluid tariff regimes.

Wireless vibration monitoring evaluation kit supports condition-based monitoring of motors in robotics, pumps, fans, wind turbines, and other systems.

Heat shrink tubing is an essential component protecting, insulating, and organizing wiring in everything from consumer electronics to aerospace systems.

Use stainless steel connector shells to protect against dust, water, mechanical shock, vibration, and corrosive chemicals.

Littelfuse SiC MOSFETs, MOS-gated thyristors, and rectifiers enable efficient, reliable SMPS designs for EV chargers, solar inverters, and motor drives.

Achieving readout resolution of 7.5 digits requires careful attention to component selection, circuit topology, and physical layout, plus many subtle details.

Murata components provide a toolkit for personal diabetes application designs that balance precision, reliability, and connectivity, while ensuring safety.

In this technical post, we explore the widely used CH340 IC from WCH, a popular USB-to-serial converter.

In this post, we measure the BMP280 barometric pressure sensor in Normal mode and Forced mode using the Nordic Power Profiler Kit II (PPK2).

Motor control solutions that prioritize energy efficiency are enabled by technologies that optimize motor performance while reducing energy consumption.

Explore why narrow beam detection struggles in material handling applications and how wide-beam retroreflective technology solves these problems.

Single protocol Ethernet has been reimagined for the rigors of industrial environments, where timing sensitivity, redundancy, and resilience are non-negotiable.

Industrial Ethernet networks rely on ICMs and their subcomponents for transmission speeds of 1 Gbps and higher, as well as up to 90 W of DC Power over Ethernet.

Using minimal current, haptic devices can be used to produce precise vibrations. Their ultra-thin profile makes them suited for space-constrained scenarios.

Learn how HellermannTyton TabTags simplify cable labeling in industrial, telecom, and control panel applications through ergonomic, self-laminating designs.

As the agricultural industry evolves with the integration of advanced technologies, the need for smart business practices becomes increasingly critical.

A GNSS module and associated development resources offer a path to rapid deployment of centimeter-scale precision positioning in diverse applications.

Want to scale hands-on learning without expanding your physical footprint. LabsLand enables students to access real hardware from anywhere.

Use EPCOS (TDK) NTC thermistors for responsive temperature monitoring in AI datacenter cooling systems, from heatsinks to coolant pipes to immersion baths.

Learn how dynamic and planar magnetic drivers create sound using magnets, diaphragms, and current.

The UNIHIKER K10 is now fully compatible with major programming platforms.

Precision agriculture relies on accurate and timely data to manage crops and resources effectively. Sensors play a crucial role in collecting this data.

Thermoelectric generator modules (often called TEGs) work by turning temperature differences into electrical voltage, or the other way around.

Instead of designing and procuring a prototype board for your project, find a development board with your key component to shorten design time.

Space application designers count on QPS components, including electrical connectors and attenuators, to have TRLs of 9 and a successful track record in space.

As Internet of Things (IoT) applications continue to evolve, developers using the ESP32 series often face challenges such as congested 2.4GHz bands, data transmission bottlenecks, and inefficient multi-device collaboration.

DFRobot’s DAC module selection guide, dividing modules into 0-2.5V/VCC, 0-5V/10V, 4-20mA categories. It details each product’s SKU, chip, channels, I/O, resolution, accuracy, features, includes functional diagrams, helping choose the right one.

Dive into the components and systems powering smart factories. See the latest trends and best practices enabling seamless integration and intelligent operation.

This guide compares FireBeetle V1 vs V2 (ESP32/ESP8266/Arduino versions), breaking down key differences in features, hardware/software compatibility to help pick the best for smart home/IoT.

A comprehensive comparison of pH sensors tailored for various applications from Arduino enthusiasts to industrial monitoring.

Interface resistance, ESD, and EMI must be overcome for continuous and stable operation of automated production robots, enhancing smart factory efficiency.

Electrical connectors in high-current applications, such as power distribution, use low-contact-resistance sockets to minimize voltage drop and heat generation.

This 100W global shutter Raspberry Pi camera enables high-precision capture for fast-moving objects/dynamic scenes.

Efficient, customizable DC-UPSs use DIN-rail mounting to easily install backup DC power systems to ensure safety, prevent equipment damage, and stop data loss.

MLCCs, polymer electrolytic capacitors, metallized film capacitors, and flexible frequency-suppressor sheets enable 5G telecommunications infrastructure design.

Power systems in medical devices are among the most regulated and scrutinized components, and failure is simply not an option.

When working on the UNIHIKER K10 AI vision recognition project, we often need to recognize our own face or point the camera in a different direction. However, since the K10's camera is fixed on the board, this can be difficult. To solve this, we can use a 24-pin FPC Extension Board and an FPC cable.

Learn how a CS major tackled robotics, wireless charging, and Raspberry Pi with no prior hardware background.

Find out how C0G MLCCs from Kyocera AVX match or exceed the performance of film capacitors and save on space.

A demonstration of how Microchip’s MTCH controllers are a ready-made touch and liquid detection solution that removes the aggravation of developing firmware.

An integrated 1000Base-T1 PHY transceiver and design resources combine to accelerate the design of real-time single-pair Ethernet systems.

The D-subminiature connector family with PosiBand contacts offers many size and contact options, ruggedness, and high signal performance.

MEAN WELL LOP series PCB type open frame power supplies are available in power ranges of 200 W to 600 W and meet a broad range of regulatory standards.

Learn how APEM Dual Icon series LED indicators use dichroic technology to save equipment panel space and provide clear visibility of system status.