STEVAL-CCA001V1: 2.3W @ 4Ω @ 5V, 2.4 ~ 5.5V in

Summary

The TS4962 is a differential class-D BTL power amplifier. It can drive up to 2.2 W into a 4 Ω load and 1.4 W into an 8 Ω load at 5 V. It achieves outstanding efficiency (88% typ.) compared to standard AB-class audio amps.

The gain of the device can be controlled via two external gain setting resistors. Pop & click reduction circuitry provides low on/off switch noise while allowing the device to start within 5 ms. A standby function (active low) enables the current consumption to be reduced to 10 nA typical.

Specifications

Manufacturer STMicroelectronics
Category Audio Amplifiers
Eval Board Board not Stocked
Amplifier Type Class D
Number of Outputs Mono
Output Power (RMS) @ Load 1.4 W @ 8 Ω (5V)
2.3 W @ 4 Ω (5V)
Voltage In 2.4 ~ 5.5 V
THD+N (1kHz) @ Conditions < 1% @ 0.3 W (8 Ω, 2.5 V, 15uH)
< 1% @ 0.5 W (4 Ω, 2.5V, 15uH)
< 1% @ 0.7 W (8 Ω, 3.6V, 15uH)
< 1% @ 1.2 W (8 Ω, 5V)
< 1% @ 1.4 W (4 Ω, 3.6V, 15uH)
< 1% @ 2.3 W (4 Ω, 5V, 15uH)
Features Digital Gain
Short Circuit Protection
Shutdown, Enable, Standby
Thermal Protection
Efficiency @ Conditions >85%, 150 ~ 500 mW @ 8 Ω, 3 V
>85%, 0.2 ~ 1.4 W @ 4 Ω, 5 V
>78%, 0.75 ~ 2.3 W @ 4 Ω, 5 V
>77%, 50 ~ 750 mW @ 4 Ω, 3 V
Standby Current [Typical] 10 nA
Quiescent Current [Typical] 2.3 mA
Component Count + Extras 6 + 10
Application / Target Market Cell Phones
Digital Cameras
Portable Devices
RF: BlueTooth Headsets
Design Author STMicroelectronics
Main I.C. Base Part TS4962
Quiescent Current [Maximum] 3.3 mA
Standby Current [Maximum] 1 µA
Date Created By Author 2005-03
Date Added To Library 2012-08

Support Documents & Media

TS4962 - Datasheet STEVAL-CCA001V1 - User Guide – App Note AN2134

Media

STEVAL_CCA001V1_Schematic_Full.png STEVAL_CCA001V1_Board_Full.jpg STEVAL_CCA001V1_Chart_1_Full.png STEVAL_CCA001V1_Chart_2_Full.png STEVAL_CCA001V1_Chart_3_Full.png STEVAL_CCA001V1_Chart_4_Full.png STEVAL_CCA001V1_Chart_5_Full.png