Recom Power의 R1SX 규격서

DESIGN avallahle
DC/DC Converter
Y
E
A
R
w
a
r
r
a
n
t
y
3
www.recom-power.com REV.: 6/2020 ECO-1
Features
Unregulated
Converters
• 1W Power in SMD package
• Pin compatible with R1S series
• -40°C to +100°C operating temperature @ full load
• High 3kVDC/1 second or 1kVDC/1 second isolation
• IEC/EN/UL62368-1 certified, CB Report
• 5000m operation
R1SX
1 Watt
SMD
Single Output
Description
Low cost, low profile, open-frame 1W SMD isolated DC/DC single output converters. The R1SX is avail-
able with 3.3V or 5V inputs and offers a single unregulated 3.3V or 5V output. There is no minimum
load requirement and the quiescent consumption is less than 150mW. Standard isolation is 1kVDC/1s
and a /H version with 3kVDC/1s is available. The operating temperature is from -40°C up to +100°C
without derating. The pin-out is industry standard and compatible with the R1S/R1D series, but at half
the height. The converters are fully certified to IEC/EN/UL62368 and IEC/EN/UL60950 and are 10/10
RoHS-conform. Class A EMC conformity requires only an input capacitor and a simple low cost LC filter
is all that is needed for Class B EMC. Standard packaging is tape and reel.
Notes:
Note1: Efficiency is tested at nominal input and full load at +25°C ambient
Note2: Max cap load is tested at nominal input and full resistive load
Notes:
Note3: Without suffix, standard isolation voltage (1kVDC/1 second),
with suffix „/H“, high isolation voltage (3kVDC/1 second)
IEC/EN62368-1 certified
UL62368-1 certified
IEC/EN60950-1 certified
C22.2 No. 62368-1-14 certified
CB Report
EN55032 compliant
EN55024 compliant
E224736
Model Numbering
Packaging
Isolation Voltage (3)
nom. Output Voltage
Output Power
Single
nom. Input Voltage
R1 SX-__ __ /_ -R
Ordering Examples:
R1SX-3.305-R 3.3Vin 5Vout 1kVDC/1 second isolation tape and reel packaging
R1SX-0505/H-R 5Vin 5Vout 3kVDC/1 second isolation tape and reel packaging
www.recom-power.com/eval-ref-boards
Selection Guide
Part nom. Input Output Output Efficiency max. Capacitive
Number Voltage Voltage Current typ.
(1) Load
(2)
[VDC] [VDC] [mA] [%] [µF]
R1SX-3.33.3 3.3 3.3 303 74 2200
R1SX-3.305 3.3 5 200 78 2200
R1SX-0505 5 5 200 78 2200
R1SX-1205 12 5 200 79 2200
EL 55:25 E 5:22..” +15% EL @9225 «:35 E $5.5. sea
DC/DC Converter
Specifications (measured @ Ta= 25°C, nominal input voltage, full load unless otherwise specified)
R1SX
Series
www.recom-power.com REV.: 6/2020 ECO-2
BASIC CHARACTERISTICS
Parameter Condition Min. Typ. Max.
Internal Input Filter capacitor
Input Voltage Range ±10.0%
Quiescent Current 40mA
Minimum Load 0%
Internal Operating Frequency 20kHz 60kHz 100kHz
Output Ripple and Noise (4) 20MHz BW 100mVp-p
REGULATIONS
Parameter
Condition
Value
Output Accuracy ±5.0% max.
Line Regulation low line to high line ±1.2% typ. at 1.0% of Vin typ.
Load Regulation 10% to 100% load 3.3Vout
5Vout
10.0% typ. / 15.0% max.
7.0% typ. / 15.0% max.
Efficiency vs. Load
R1SX-3.33.3(/H) R1SX-xx05(/H)
0 10 20 30 40 50 60 70 80 90 100
100
80
60
40
90
70
50
30
20
10
0
Efficiency [%]
Output Load [%]
3.3Vin
5Vin
DX-xx05
0 10 20 30 40 50 60 70 80 90 100
100
80
60
40
90
70
50
30
20
10
0
Efficiency [%]
Output Load [%]
SX-3.33-3
Notes:
Note4: Measurements are made with a 0.1µF MLCC across output (low ESR)
Tolerance Envelope
R1SX-3.33.3(/H) R1SX-xx05(/H)
+15%
+10%
Vnom
+5%
-1%
-5%
Output Voltage [%]
10 50 100
Output Load [%]
Typical Load Line
+15%
+7%
Vnom
+5%
-1%
-5%
Output Voltage [%]
10 50 100
Output Load [%]
Typical Load Line
DC/DC Converter
Specifications (measured @ Ta= 25°C, nominal input voltage, full load unless otherwise specified)
R1SX
Series
www.recom-power.com REV.: 6/2020 ECO-3
PROTECTIONS
Parameter Type Value
Isolation Voltage I/P to O/P
standard tested for 1 second
rated for 1 minute (5)
1kVDC
500VAC
with suffix “/H” tested for 1 second
rated for 1 minute (5)
3kVDC
1.5kVAC
Isolation Resistance 10GΩ min.
Isolation Capacitance 70pF max.
Leakage Current standard
with suffix “/H”
1µA max.
3µA max.
Insulation Grade functional
Notes:
Note5: For repeat Hi-Pot testing, reduce the time and/or the test voltage
Note6: Refer to local safety regulations if input over-current protection is also required. Recommended fuse: slow blow type
Protection Circuit
L1
C1
F1
-Vout
+Vout
-Vin
+Vin
+V
out
+V
in
-V
out
-V
in
ENVIRONMENTAL
Parameter Condition
Value
Operating Temperature Range @ natural convection and full load (refer to derating graph) -40°C to +100°C
Operating Altitude 5000m
Operating Humidity non-condensing 5% - 95% RH max.
Pollution Degree PD2
Vibration according to MIL-STD-202G
MTBF according to MIL-HDBK-217F, G.B. +25°C
+100°C
21400 x 10³ hours
7800 x 10³ hours
Derating Graph
(@ Chamber and natural convection 0.1m/s)
-40 -20 0 20 40 7060-30 -10 10 30 50 80 90 110100
100
80
60
40
90
70
50
30
20
10
0
Output Load [%]
Ambient Temperature [°C]
DC/DC Converter
Specifications (measured @ Ta= 25°C, nominal input voltage, full load unless otherwise specified)
R1SX
Series
www.recom-power.com REV.: 6/2020 ECO-4
SAFETY AND CERTIFICATIONS
Certificate Type (Safety) Report / File Number Standard
Information Technology Equipment, General Requirements for Safety E224736 UL60950-1, 2nd Edition 2014
CAN/CSA C22.2 No. 60950-1-07, 2nd Edition 2014
Information Technology Equipment, General Requirements for Safety (CB Scheme) E224736-4788277362-2 IEC60950-1:2005 2nd Edition + A2:2013
Information Technology Equipment, General Requirements for Safety EN60950-1:2006 + A2:2013
Audio/video, information and communication technology equipment - Safety requirements
(LVD) E224736 UL62368, 2nd Edition, 2014
CAN/CSA -C22.2 No. 62368-1-14, 2nd Edition, 2014
Audio/video, information and communication technology equipment - Safety requirements
E224736-4788277362-1
EN62368-1:2014 + A11:2017
Audio/video, information and communication technology equipment - Safety requirements
(CB Scheme) IEC62368-1:2014 2nd Edition
RoHS2+ RoHS 2011/65/EU + AM2015/863
EMC Compliance Condition Standard / Criterion
Information technology equipment - Radio disturbance characteristics - Limits and methods
of measurement
with external filter
(see filter suggestion)
EN55032:2015, Class A and B
Information technology equipment - Immunity characteristics Limits and methods of
measurement EN55024:2010 +A1:2015
ESD Electrostatic discharge immunity test
Air: ±2, 4, 6, 8kV
Contact: ±2, 4kV
IEC61000-4-2:2008, Criteria B
Radiated, radio-frequency, electromagnetic field immunity test
3 V/m
IEC61000-4-3:2006 + A2:2010, Criteria A
Fast Transient and Burst Immunity
±0.5kV
IEC61000-4-4:2012, Criteria A
Surge Immunity
±0.5kV
IEC61000-4-5:2014, Criteria A
Immunity to conducted disturbances, induced by radio-frequency fields
3V r.m.s.
IEC61000-4-6:2013, Criteria A
Power Magnetic Field Immunity
50Hz / 1A/m
IEC61000-4-8:2009, Criteria A
Component List Class A
Model C1 C2 L1
R1SX-3.3xxS 22µF MLCC 470pF/4kVDC N/A
R1SX-05xxS
Component List Class B
Model C1 C2 L1
R1SX-3.3xxS 22µF MLCC
470pF/4kVDC
3.3µH SMD Inductor
R1SX-05xxS 10µF MLCC 4.7µH SMD Inductor
R1SX-12xxS 4.7µF MLCC 22µH SMD Inductor
C1
-Vout
+Vout
-Vin
+Vin
C2
L1
+V
out
+V
in
-V
out
-V
in
EMC Filtering Suggestions for EN55032
DIMENSION and PHYSICAL CHARACTERISTICS
Parameter Type Value
Material case
PCB
black plastic (UL94V-0)
FR4 (UL94V-0)
Dimension (LxWxH) 12.75 x 11.10 x 5.80mm
Weight 1.0g typ.
continued on next page
fig flat a %%fig — m “1315] nafififlfigr : : fig” JZH‘ , — T—W 7W 7 12} 7 7] ******* [ 3 5 —+—m ‘ ‘* ii E R1SX-3.305 F44? | 4’41? mé
DC/DC Converter
Specifications (measured @ Ta= 25°C, nominal input voltage, full load unless otherwise specified)
R1SX
Series
www.recom-power.com REV.: 6/2020 ECO-5
Dimension Drawing (mm)
Pin Connection
Pin # Single
1 -Vin
2 +Vin
4 -Vout
5 +Vout
8 NC
CG= center of gravity
NC= no connection
Tolerance: xx.x= ±0.5mm
xx.xx= ±0.25mm
Pin
Thickness: ±0.05mm
Lenght: +0.25/-0.50mm
Recommended Footprint Details
INSTALLATION and APPLICATION
GND
AGND
OUT
B
OUT
A
IN
A
IN
B
IC
1
ISOLATION
AGND
AGND
GND
GND
R1SX-3.305
3.3V 5V
C1
C3 C4
C2
-Vout
+Vout
-Vin
+Vin
+V
out
+V
in
-V
out
-V
in
Isolated Bus
Block diagram of an isolated data interface with 3.3V to 5V logic level shifting. Typcial Applications include microcontroller interfacing, logic level translation
and multi-channel test and measurement systems.
Bottom View Top View
1
8 5
8 5
42
1 42
11.1
12.75
0.50
10.8
12.07
8.9
2.56
5.5
0.25
3x2.54= 7.62
5.8 +0.35/-0.25
0.80
2.54
1.27
2.54
CG suckable
area
DC/DC Converter
Specifications (measured @ Ta= 25°C, nominal input voltage, full load unless otherwise specified)
R1SX
Series
www.recom-power.com REV.: 6/2020 ECO-6
The product information and specifications may be subject to changes even without prior written notice.The product has been designed for various applications; its suitability lies in the responsibility of each customer.
The
products are not authorized for use in safety-critical applications without RECOM’s explicit written consent. A safety-critical application is an application where a failure may reasonably be expected to endanger or
cause
loss of life, inflict bodily harm or damage property. The applicant shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the
unauthorized
use of RECOM products in such safety-critical applications.
PACKAGING INFORMATION
Packaging Dimension (LxWxH) tape and reel (carton)
reel
355.0 x 340.0 x 35.0mm
330.2 x 330.2 x 30.0mm
Packaging Quantity tape and reel 450pcs
Tape Width 24.0mm
Storage Temperature Range -55°C to +125°C
Storage Humidity 5% - 95% RH max.