주문 제품은 지역에 따라 일반적으로3일~4일 이내에 대한민국 배송됩니다.
60,000 이상 주문 시 대한민국 무료로 배송됩니다. 미화 60,000 미만의 모든 주문에 대해서는 미화 20,000원의 배송 비용이 청구됩니다.
CPT (배송 시 관세 및 세금 지불)
적격 기관 및 회사를 위한 신용거래 계정
온라인 송금을 통한 선지급
자세한 내용은 도움말 및 지원을 참조하세요.
*상기의 배송 관련 주요 사항은 Marketplace 제품에는 적용되지 않습니다.
최신 전자 산업 뉴스를 위한 리소스!
Analog Devices offers this application note about the effect of long-term drift on voltage references.
This application note discusses the ways of performing harmonic analysis and the gain compensation analysis using the EVAL- ADE9000EBZ evaluation board.
ADI RF signal sources are used to create test waveforms at radio frequencies. Some of their common applications are to test if a new radio platform works or if the handsets coming off a production line are performing as they should.
This application note provides a recommended procedure for removing a plastic ball grid array package (PBGA) from a printed circuit board (PCB).
State-of-the-art motor drives use a 3-phase, insulated gate bipolar transistor (IGBT)-based inverter that is powered by a dc link voltage typically in the region of 400 V dc to 800 V dc.
iCoupler® digital isolators with integrated isolated power (isoPower®) employ isolated dc-to-dc converters that switch currents of ~700 mA at frequencies as high as 300 MHz.
One common method for determining the tilt or inclination of a system is to integrate the output of a gyroscope.
Connecting a PC to your MicroConverter chip for downloading or debugging code requires an RS-232 line driver/receiver chip to step the UART’s CMOS logic levels up RS-232 levels.
The application note outlines the implementation of an IEEE 1451.2 compatible interface on the Analog Devices ADuC812 MicroConverter.
This application note describes the serial download protocol for the ADuC8xx family of products.
This technical note describes the use of the Keil uVision2 Integrated Development Environment in the development of a ‘C’ based, MicroConverter application.
The ADuC83X family (“big memory family”) all integrate a large program memory space, with 62kBytes of flash/EE program memory available to the user.
Functions are the basic building blocks of the C programming language.
The battery-powered temperature logger in Figure 1 was built to demonstrate some features of the ADuC824 MicroConverter.
The ADuC832 is an upgrade to the ADuC812. Its additional features include 62kB program flash, 2kB on chip RAM and 4kB data flash.
The on-chip ADC has been designed to run at a maximum conversion speed of 5 uS (200 kHz sampling rate).
A Time Interval Counter is provided on-chip for counting longer intervals than the standard 8051-compatible timers are capable of.
The ADuC831 is an upgrade to the ADuC812. Its additional features include 62kB program flash, 2kB on chip RAM and 4kB data flash.
Today’s optical market may not seem very promising; this could be due mainly to the cyclical nature of the optical networking infrastructure.
The SFP Digital Diagnostics Development Board is a platform designed to enable optical module designers to develop SFP and SFF compliant transceivers with digital diagnostics.
받은 편지함에서 Digi-Key의 뉴스 및 업데이트를 확인하세요!
이메일 주소를 입력하세요.